8. Removing the Y Motor Home Position Sensor
1) Slide the holding tray assembly to the front and out of the copier.
2) Remove the right rail, and turn over the holding tray assembly.
3) Remove the mounting screw
assembly
.
9. Removing the Holding Tray Inlet Assembly
1) Remove the mounting screw
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
, and remove the Y motor home position sensor
Figure 5-882
, and remove the inlet assembly front upper cover
Figure 5-883
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
.
5-107