Canon NP6251 Service Manual page 694

Item
LIFT Indicates '1' if the lifter position sensor does not turn on
within 8 sec after the UP command for the lifter (paper
deck/cassette) has been issued.
Order of Indication
• Paper Deck Type
right deck, left deck, cassette 3, cassette 4, side paper
deck (if installed)
• For LMP1 and LMP2, the activation control voltage value is indicated even when
the scanning lamp is off.
Caution:
If a value other than '0' is indicated for 'WIRE' because of an error in the charging
cleaner, be sure to execute 'wire cleaning' in user mode.
If the wire cleaner motor and the wire cleaner unit are normal, executing wire
cleaning turns on the cleaner unit and stops it at home position, clearing the
indication to '0'.
(Unless you execute wire cleaning, the associated operation is prohibited and the
machine will not be reset even when the machine is turned off and on.)
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Description
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 TROUBLESHOOTING
Remarks
Resetting is by
turning OFF and
ON the power
switch.
11-163