Basic Sequence Of Operations In Page Separation Mode - Canon NP6251 Service Manual

4. Basic Sequence of Operations in Page Separation Mode

When making copies in page separation mode, the original on the left on the
copyboard is copied (SCFW1) and then the original on the right (SCFW2).
If the copy count is '2' or higher, the original on the left on the copyboard is copied
for as many copies as specified, and then the original on the right for as many copies.
In page separation mode, the copier's AE mode (if ON) is used. The density of the
original in such a case is over a distance 120 mm from the leading edge of the original;
the originals on both left and right sides on the copyboard are copied based on the
resulting measurements.
Reference:
If the conditions for potential control given on p. 4-1 are met, potential control
rotation (CNTR1, 2) is executed after INTR.
Copy Start key
Main motor (M1)
Primary charging
assembly
Pre-transfer charging
assembly
Transfer charging
assembly
Separation charging
assembly
Blanking exposure
LED lamp
Right deck/cassette
pick-up clutch (CL14)
Scanning lamp (LA1)
Scanner
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
   
ON
INTR AER SCFW1SCRV1
F orward Reverse
Figure 2-106
CANON NP6350/NP6251 REV.0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 BASIC OPERATION
SCDP
SCRV2 LSTR
SCFW2
STBYS
2-9