2. Installing the Transfer/Separation Charging Assembly
Install the transfer/separation charging assembly by reversing the steps used to
remove it with the following in mind:
1) Be sure to fit the four bosses
cut-off
of the frame of the fixing/feeding unit.
2) Be sure to put the leaf spring
of the transfer/separation charging assembly (when sliding it from the front).
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
of the transfer/separation charging assembly in the
of the fixing/feeding unit into contact with the frame
Figure 4-319
Figure 4-320
Figure 4-321
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
4-51