Canon NP6251 Service Manual page 443

6) Remove the coupling shaft
7) Remove the two screws
on the outside.
8) Remove the two screws
on the inside.
• To detach the lifter cable
the two set screws
advance.
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
and the E-ring
and the cable fixing plate
and the cable fixing plate
on the inside from the pulley
on the pulley
Figure 8-408
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 PAPER DECK-A1
; then, remove the pulley cover
; then, remove the lifter cable
; then, remove the lifter cable
on the inside, remove
on the outside, and remove the pulley in
.
8-39