Installing The Copy Data Controller-A1; Setting The Board - Canon NP6251 Service Manual

CHAPTER 9 INSTALLATION
V. INSTALLING THE COPY DATA CONTROLLER-A1
Note:
The Copy Data Controller-A1 is not available in certain sales areas.
A. Setting the Board
1) Remove the two screws, and remove the top cover.
2) Set the DIP switch (SW1, SW5) on the Copy Data Controller-A1 according to the
needs of the user.
2-1) Set the DIP switch (SW1-4) according to the type of copier.
2-2) If control by group is desired, set the DIP switch (SW5-2) according to the control
paper size.
• To control AB-configuration paper (A3, A4, B4, B5), shift it to OFF.
• To control inch-configuration paper (11
9-40
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Top cover
Screw
Fig. 9-501
× 17, LTR, LGL, STMT), shift it to ON.
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Screw