CHAPTER 5 PICK-UP/FEEDING SYSTEM
3. Removing the Feeding Roller
1) Remove the left deck pick-up assembly from the copier.
2) Remove the stop ring
3) Remove the pick-up roller
with the timing belt
4. Removing the Separation Roller
1) Remove the left deck pick-up assembly from the copier.
2) Remove the mounting screw
the joint.
3) Remove the separation roller
Note:
Take care not to lose the pin from the roller.
5-90
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
.
at the front; then, remove the feeding roller
.
Figure 5-851
, and detach the separation roller assembly
Figure 5-852
from the separation roller shaft mount.
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
together
from