Registration Feeding Assembly; Construction; Removing The Registration Feeding Assembly - Canon NP6251 Service Manual

F. Registration Feeding Assembly

1. Construction

2. Removing the Registration Feeding Assembly

1) Open the front cover, and slide out the fixing/feeding unit from the copier.
2) Remove the fixing/feeding front cover, and remove the transfer/separation charging
assembly.
3) Remove the two mounting screws
then, remove the registration feeding assembly pressure spring
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Figure 5-856
, and remove the right rail support plate
Figure 5-857
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
Registration feeding
assembly
.
;
5-93