4. Adjusting the Deck Registration
If the left/right registration (standard, 0 ±1.5 mm) must be adjusted, perform the
following:
1) Draw out the compartment, and fix the latch plate
(SL102) using the two screws
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
. (At this time, refer to line
(rear left of compartment)
Figure 8-360
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 PAPER DECK-A1
of the deck opening solenoid
on the latch plate.)
8-33