Canon NP6251 Service Manual page 538

b. Cassette
3-1.Adjusting the Left/Right Registration (paper deck-A1)
1) Make a copy of the Test Sheet, and check to make sure that the left/right registration
between copy image and paper deck is 0 ±1.5 mm or less.
2) If the left/right registration is not as specified, adjust the position of the latch plate of
the deck opening solenoid by turning the two adjusting screws. (At this time, use the
scale on the latch plate as a reference.)
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Figure 11-205
Latch plate
Figure 11-205a (rear left of compartment)
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 TROUBLESHOOTING
Adjusting
Plate
Screw
Scale
Screws
11-7