Separation Claw/Separation Claw Drive Assembly - Canon NP6251 Service Manual

4) Turn the magnet roller clockwise (viewing from the front).
5) When a full coating has developed in the area from which toner was removed in step
3), repeat steps 3) through 5).
N. Separation Claw/Separation Claw Drive Assembly
1. Removing from the Drum Unit
1) Remove the process unit from the copier. (See p. 7-18.)
Caution:
1. Take care not to bend the separation claw.
2. Take care not to damage the photosensitive drum.
2) Remove the screw
3) Remove the screw
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
, and remove the No. 2 insulating plate
, and remove the claw holder
Figure 4-356
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
.
.
4-71