CHAPTER 4 IMAGE FORMATION SYSTEM
4) Remove the E-ring
5) Loosen the five mounting screws
support plate.
3. Installing the Cleaning Blade
Install the cleaning blade by reversing the steps used to remove it with the following
in mind:
1) Butt the cleaning blade
4-68
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
, and remove the pressure spring
Figure 4-350
, and remove the cleaning blade from the blade
Figure 4-351
against the rear.
No gap.
Figure 4-352
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.
Blade retaining plate