Canon NP6251 Service Manual page 751

CHAPTER 11 TROUBLESHOOTING
Item
SEP-1 Use it to adjust the current (1st side) for
the separation charging assembly. (It is
pre-adjusted at the factory; enter the
value recorded on the service label if
you have replaced the DC controller
PCB.)
SEP-DUP Use it to adjust the current (2nd side of
two-sided) for the separation charging
assembly. (It is pre-adjusted at the
factory; enter the value recorded on the
service label if you have replaced the
DC controller PCB.)
SEP-OVL Use it to adjust the current (2nd side of
overlay) for the separation charging
assembly. (It is pre-adjusted at the
factory; enter the value on the service
label if you have replaced the DC
controller PCB.)
11-220
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Screen 3-6
Description
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
6/17
Settings
Label value ±200
Label value ±200
Label value ±200
Remarks