Extended Modes - Canon NP6251 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
B. Extended Modes
Mode
Auto Start
Pre-Heat
Bind
Frame Erase
Two-Sided Copy
Overlay Copy
Auto Paper Select
Auto Ratio Select
Interrupt
Reduced Image
Composition
Cover mode
ID
1-14
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Use it while in wait state for automatic start.
Use it to turn off the indicators on the control panel except the
Power and the Pre-Heat indicators.
Use it to select right binding, left binding, top binding, or bottom
binding.
Use it to select original frame erasing, sheet frame erasing, hole
image erasing, or book frame erasing.
Use it to select "one-sided original to two-sided copy," "two-sided
original to two-sided copy," or "two-sided original to one-sided
copy."
Use it to make overlay copies.
Use it for automatic selection of copy paper best suited to original
size and copy size.
Use it for automatic selection of reproduction ratio best suited to
original size and copy paper size.
Use it to interrupt on-going continuous copying for a different
original.
Use it to select 2-on-1, 4-on-1, 2-on-1 two-sided, or 2-on-1
overlay.
Use it to select cover, back cover, or interleaf (20 sheets or less).
Use it so that copying is possible only in response to a pre-
registered ID (300 max.).
Table 1-401
CANON NP6350/NP6251 REV.0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Description