Adjusting The Height Of The Charging Wire - Canon NP6251 Service Manual

2. Adjusting the Height of the Charging Wire

Charging assembly
Primary
Pre-transfer
Transfer
Separation
Reference:
You can adjust the height (position) of the primary, transfer/separation charging wire
by turning the screw behind the charging assembly. A full turn changes the position
of the charging wire by about 0.7 mm.
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Height of charging wire
7.5+1.5
-0mm
9.5+1.0
A B
A:16.2±0.5mm B:14.9±0.5mm
Table 11-201
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 TROUBLESHOOTING
7.5+1.5
-0mm
-0mm
10.2±0.5mm
Tolerance
±1mm
No adjusting
mechanism
±2mm
±2mm
11-19