Holding Tray Feeding Assembly; Removing The Holding Tray Feeding Assembly From The Copier - Canon NP6251 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
I. Holding Tray Feeding Assembly

1. Removing the Holding Tray Feeding Assembly from the Copier

1) Open the front cover, and slide out the holding tray feeding assembly to the front.
2) Remove the three mounting screws
assembly front cover
3) Remove the five mounting screws

holding tray feeding assembly

5-118
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
, and remove the holding tray feeding
.
Figure 5-904
and two metal fixings
from the rail.
Figure 5-905
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
, and detach the