Canon NP6251 Service Manual page 100

8) Remove the mounting screw
assembly .
9) Remove the three mounting screws
remove the scanner drive motor assembly
Caution:
A drive belt is on the gear of the motor shaft; remove the motor while detaching the
belt.
Caution:
The scanner drive motor assembly is fixed in position at the factory with a jig
making sure that the tension of the belt of the motor assembly is as specified.
When removing the scanner drive motor assembly, be sure to mark the edge of the
motor assembly in advance.
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
, and remove the RDF/copyboard cover detection
Figure 3-503
, and disconnect the two connectors
Figure 504
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 EXPOSURE SYSTEM
.
; then,
3-25