Canon NP6251 Service Manual page 507

CHAPTER 9 INSTALLATION
10) Set the control paper size.
10-1) Use the DIP switch on the Copy Data Controller-A1 and the Ten Key Pad-A1 to
change the control paper size. If the default represents the control paper size, go
to step 11).
10-2) Use the /
5 'OTH' cannot be changed and is not displayed.)
EX1:
1. The display shows
2. Press the
3. The display shows
4. Press the
5. The display shows
6. Press the
7. The display shows
8. Press the
9. The display shows
10.Press the
11. The display shows
EX2:
To change B4 to LGL, control paper size 3,
1. Press the
2. Look for the value that represents LGL from Table 9-506 (conversion table);
press .
3. The display shows
4. Press the
ENT
5. The display shows
Note:
1. You cannot make multiple paper size codes for SIZE1 through 4.
2. The counter reading remains intact after changing the size.
9-52
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
key to scan through the paper sizes. (However, control paper size
.
SIZE 1 =A3
key.
.
SIZE 2 =A4
key.
.
SIZE 3 =B4
key.
.
SIZE 4 =B5
key.
.
SIZE 3 =B4
key.
.
SIZE 2 =A4
/ key so that the display shows
.
SIZE 3 =13
key.
SIZE 3 =LGL
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
SIZE 3 =B4
to indicate the end of the operation.
.