Canon NP6251 Service Manual page 178

CHAPTER 4 IMAGE FORMATION SYSTEM
7) Remove the grip ring
butting roll .
8) Remove the two mounting screws
mounting plate.
9) Remove the bearing
.
Caution:
Do not leave fingerprints or oils on the surface of the developing cylinder.
If any, dry wipe the surface with lint-free paper. (Do not use solvent.)
4-64
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
mounted to the cylinder shaft at the front, and remove the
Figure 4-343
, and remove the blade
Figure 4-344
at the front and the rear, and remove the developing cylinder
Figure 4-345
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
together with the