8. Positioning the Scanner Locking Solenoid (SL1)
• Making Adjustments
1) Remove the rear cover.
2) Remove the multifeeder assembly.
3) Adjust the stroke of the scanner locking solenoid once again so that it is as specified.
E-ring
Standard
8.5 ±0.5 mm
(from below
clamp to top
of solenoid)
Scanner locking solenoid
(SL1)
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Figure 3-515
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 EXPOSURE SYSTEM
Loosen these two
screws to adjust
once again.
3-31