Function Mode - Canon NP6251 Service Manual

G. Function Mode (
Using the or
Press the appropriate item to select. (The selected item is highlighted.)
A press on the user mode key (*) will execute the selected item.
Check to make sure that the machine is in standby before executing any item.
Item
TONER-S Use it to supply toner during machine installation.
The duration of supply will be indicated in seconds;
normally, it takes 7 to 9 min (420 sec to 540 sec).
Check that the developing assembly is set correctly
and locked in position before pressing OK to start.
The display will indicate the message "Check the Developer" in response to a
press on the * key. If the developing assembly has been installed, press the OK
key on the touch panel, and then press the * key.
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
)
4
key, select the appropriate item.
Screen 4-1
Description
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 TROUBLESHOOTING
1/11
Remarks
The operation will stop
automatically.
11-233