Changing The Deck Paper Size - Canon NP6251 Service Manual

3. Changing the Deck Paper Size

The deck paper size is changed by changing the position of the front, rear, and rear
left guide plates.
Reference:
At time of shipment, the deck paper size is set to A4; if the user wants a non-A4
size, change the size; otherwise, skip the steps that follow. (You need, however, to
attach the A4 size label.)
1) Slide out the deck to the front until it stops.
2) Remove the three mounting screws
remove the three guide plates
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Top plate
(left)
Figure 5-829b
on the guide plates (front, rear, rear left); then,
.
(rear)
Figure 5-830
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
Hook fixing plate
(front)
5-77