Canon NP6251 Service Manual page 483

CHAPTER 9 INSTALLATION
Step
6 Adjust the size guide plate to suit the
needs of the user, and place copy
paper in the cassette and the paper
deck.
7 Attach the appropriate stickers to the
paper size plate of the paper deck
and the cassettes.
8 Slide the cassette and the paper
deck into the machine.
9 Insert the copy tray to the copier.
10 When the wait period ends, start
service mode. (Press the service
switch with a clip through the hole in
the inside upper left cover.)
Select 'TONER-S' (*4*), and press
the user mode key *.
Check that
DEVELOPER' is indicated.
After making
developing assembly is installed,
press the OK key.
Press the user mode key *.
Toner is supplied (from hopper to
develop); (about 8 to 10 min).
Press the Reset key twice to leave
service mode.
9-28
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Work
↓
'CHECK THE
↓
sure that the
↓
↓
↓
↓
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
• Close the front door so that the inside is free
of light.
• The mode lasts about 10 min (max.) to
supply toner from the hopper to the
developing assembly.
• Do NOT turn off the power while the
machine is operating.