Canon NP6251 Service Manual page 261

CHAPTER 5 PICK-UP/FEEDING SYSTEM
7) Remove the E-ring
cover toward the front, detach the end of the cable
8) While holding the rear gear and the spring in place, remove the E-ring
sliding out the pulley cover toward the front, detach the cable
.
9) Detach the end of the cable from the pulley.
5-74
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
at the front; then, while sliding out the gear and the pulley
Figure 5-824
Figure 5-825
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
from the pulley.
; then, while
from the pulley cover