Canon NP6251 Service Manual page 451

6. Removing the Deck Separation Roller
1) Detach the deck from the copier, and remove the two screws
separation roller support plate
2) Remove the joint, and remove the deck separation roller
Caution:
The urethane sponge used on the deck separation roller is initially pink and
changes to yellow over time, accelerated by exposure to light (pink to orange, and
then to yellow).
The fact is common to all urethane sponge types, and will not affect its physical
performance. Keep in mind that color difference, if any, does not indicate different
part types.
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
.
Figure 8-456
Figure 8-456a
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 PAPER DECK-A1
; then, remove the
.
8-47