3) Remove the screw
4) Open the front door, and open the hopper cover. Remove the three screws
the connector cover
assembly
to the front and rotate it.
5) Shift the fixing/feeding assembly releasing lever
position, and slide out the fixing/feeding assembly
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
from the control panel.
Figure 9-403
; then, disconnect the connector and slide out the hopper
Figure 9-404
Figure 9-405
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 9 INSTALLATION
from vertical to horizontal
.
and
9-33