Adjusting The Ae Slope - Canon NP6251 Service Manual

CHAPTER 11 TROUBLESHOOTING

7. Adjusting the AE Slope

After executing AE auto adjustment, make a copy of a newspaper (or a rather dark
original). If the copy is foggy or too light, perform the following:
1) Open the front door, and insert the door switch actuator into the door switch
assembly.
2) Press the service mode switch over the cover with a clip.
3) Select 'AE_SLOP' in service mode (
4) Place a newspaper (or a relatively dark original) on the copyboard.
5) Change the setting using the numeric keypad, and press the user mode key ( ).
If you decrease the setting in adjustment mode,
→Copies of a newspaper will be lighter.
If you increase the setting in adjustment mode,
→Copies of a newspaper will be darker.
Note:
You may press the Copy Start key to make copies.
6) Press the Reset key twice to end service mode.
11-10
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
).
3
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)