Canon NP6251 Service Manual page 750

Item
TRN-1 Use it to adjust the current (1st side) for
the transfer charging assembly. (It is
pre-adjusted at the factory; enter the
value recorded on the service label if
you have replaced the DC controller
PCB.)
TRN-DUP Use it to adjust the current (2nd side of
two-sided) for the transfer charging
assembly. (It is pre-adjusted at the
factory; enter the value recorded on the
service label if you have replaced the
DC controller PCB.)
TRN-OVL Use it to adjust the current (2nd side of
overlay) for the transfer charging
assembly. (It is pre-adjusted at the
factory; enter the value recorded on the
service label if you have replaced the
DC controller PCB.)
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Screen 3-5
Description
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 TROUBLESHOOTING
5/17
Settings
Label value ±100
Label value ±100
Label value ±100
Remarks
11-219