CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
6) Remove the spring
.
7) Remove the three mounting screws
drawer connector
8) Remove the mounting screw
connectors
(J113, J114, J115) and the two relay connectors
7-36
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
, and loosen the tension pulley
Figure 7-441
, and disconnect the holding tray assembly
.
Figure 7-442
of the DC controller PCB, and disconnect the three
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
; then, detach the timing belt
.