Canon NP6251 Service Manual page 461

CHAPTER 9 INSTALLATION
Step
5 Shift the two adjusters up (front), and
check to make sure that they are
released.
6 Remove the two slope plates out of
the skid.
7 Turn over the slope plates; then,
match the pin holes in the skid and
the pin holes in the slope plates, and
insert the pins (1 each).
• Hold the grips (front/rear) of the
machine, and move the machine
along the slope plates to the floor.
8 Open the cardboard box that comes
with the machine, and take out the
parts and materials.
9-6
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Work
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Adjusters
Check to make sure that all attachments are
found in the box.