Canon NP6251 Service Manual page 466

Step
3 Install the fixing/feeding assembly
front cover with three screws. Install
the fixing knob and the releasing
lever; then, lock the lever in place
(lever to the left).
Slide the fixing/feeding assembly
into the machine.
4 Open the multifeeder door and the
upper right door, and remove the
screw from the door tape (door
stopper) of the front door (so that the
front door will not close the hopper
when the hopper is opened.)
5 Remove the tag tape from the
hopper assembly.
6 Open the hopper cover, and remove
the three screws and the connector
cover.
7 Disconnect the connector, and
release the hopper assembly.
8 Slide out the hopper assembly to the
front, and turn it 90° to the front right.
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Work
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 9 INSTALLATION
Remarks
Hopper
Screw
assembly
Connector
cover
Hopper
cover
Screws
9-11