Exposure System; Adjusting The Scanner Home Position - Canon NP6251 Service Manual

B. Exposure System

1. Adjusting the Scanner Home Position

After making copies, remove the control panel, and check to make sure that the line
in section A on the electrode mount (front) of the No. 1 mirror mount is in section B of
the hole of the glass support (front).
Otherwise, change the setting of 'BRAKE_SC' in service mode (
line in section
is within section
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
.
Electrode (front)
No. 1 mirror mount
Hole
Figure 11-208
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 TROUBLESHOOTING
3
Section A of left of wall
Glass support
(front)
B
) so that the
11-11