3) Remove the three mounting screws
sensor/multifeeder door catch assembly
4) Remove the sensor from the multifeeder door sensor/multifeeder door catch
assembly.
3. Installing the Drum Heater Switch
Install the switch so that its right side is in ON position.
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
Figure 7-430
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
, and remove the multifeeder door
.
7-29