Installing The Pick-Up Roller - Canon NP6251 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
Caution:
If you used the multifeeder (manual feeding) during machine installation or after a
long period of not using it, pick-up may fail. If such is the case, peel the protection
sheet from the sponge roller, and dry wipe the surface of the sponge roller.

3. Installing the Pick-Up Roller

Install the pick-up roller by reversing the steps used to remove it with the following in
mind:
• The pick-up roller used at the front and that used at the rear are NOT interchangeable.
• The collar on the pick-up roller to be used at the front is silver in color.
When installing the pick-up roller
that the round marking
5-62
COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
to the pick-up assembly, be sure to orient it so
on the collar (silver) is toward the front of the copier.
Direction of
rotation
Collar (silver)
Pick-up roller
Marking (collar)
Figure 5-803
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Front (copier)