Userterminal; Keys And Displays - h/p/cosmos 170-190/65 Series Original Instructions Manual

6 UserTerminal

6.1 Keys and displays

Primary function
Element
Displays currently activated mode
Displays current speed in m/min, km/h, m/s or mph (see LED)*
Displays covered distance in m, km or miles (see LED)*
Displays elapsed time in minmin:ss or hh:minmin
Displays current elevation in % or degrees (see LED)*
Displays MET, energy and power in MET, kJ or Watt and UKK
fitness index (see LED)
Displays measured heart rate (in case optional chest belt is
included)
The displays may show service information and error messages as well (see "trouble shooting").
*adjust units and decimals with OP 12-14
Primary function
Element
Select mode
Decrease / increase current speed
Decrease / increase current elevation
Conform mode
Start the operation
Stop the operation
Not an emergency stop / off!
See "emergency off"
In case of emergency, press the emergency off button!
Depending on the operation mode, the keys have additional functions (see "operation").
Press the keys softly. As confirmation, you will hear a beep.
Always the latest command will be executed, regardless of whether it came via interface or from the UserTerminal during one of the
four modes. Only stop command has higher priority and cannot be overwritten.
© 1988 - 2019 h/p/cosmos sports & medical gmbh
Secondary functions
-
Displays max. speed when selecting modes
-
Displays duration when selecting profiles
Displays current profile step / number (see
LED)
-
Displays parameter when setting cardio
mode or UKK walk test
Secondary functions
Navigate through settings, adjust parameters
See "interfere with automatic program"
Confirm setting ("enter")
Abort setting ("cancel")
Exit user options ("cancel")
-
cos105000_170-190_65, rev. 1.03 page 28 of 99