Wheelchair Ramp; Wheelchair Stabilizer For Oversize Running Machines; Safety Arch With Chest Belt System - h/p/cosmos 150/50 Operating And Service Manual

Table of Contents

Advertisement

12.11 Wheelchair ramp

wheelchair ramp 150/50 [cos16186-01]

12.12 Wheelchair stabilizer for oversize running machines

Wheelchair stabilizer for deck length 200cm: [cos10227] 250cm: [cos10226] 300cm: [cos00096110031]
Available for the h/p/cosmos running machine series with track size 200/75 cm (and bigger) with the mark "r"
Adjust the range limiters properly to limit the operation range on the deck and to ensure the
N
wheelchair does not fall off from the deck to the front or to the back.
Use safety arch with chest belt and harness for additional safety and for additional range limiter.
N
Fix the additional steel rope on the wheelchair frame similar to trailer safety ropes for bicycles for
N
additional safety.
Before using the running machine for any application without a wheelchair (running, cycling,
N
skating etc.), the wheelchair stabilizer has to be dismantled for safety reasons.
No remaining dangerous barrier, crossbar or other part of the wheelchair stabilizer must obstruct or
N
injure the subject.

12.13 Safety arch with chest belt system

Every time before using the safety arch with chest belt system, a visual examination of the
N
system for detecting damage and wear-and-tear must be done. Especially the rope, the
harness and all links such as the snap hook and the rope brake must be checked.
All wear-and-tear parts of the system (rope, harness and all links such as snap hook and
N
rope brake) are to be changed immediately in case of damage. At least every two years, all
wearing parts are to be changed.
Neither chest harnesses, patient vests, nor waist belts with leash and cuffs are designed for
N
direct skin or mucous membrane contact. Wear appropriate clothing.
© 2013 h/p/cosmos sports & medical gmbh
When using the wheelchair ramp pay particular attention to the gap
between ramp and running belt so that hands, hair, clothing or other
items do not get caught. The ramp must not touch the running belt as
this will lead to excessive wear. Ensure that the ramp is stable and
cannot slip. Be aware of danger of slipping or tripping on ramp. Do not
attempt to enter ramp from the side. Only original h/p/cosmos
wheelchair access ramps should be used.
With the help of the h/p/cosmos wheelchair stabilizer, it is easy to keep
wheelchairs with 3 or 4 wheels safely in line. The guide rail is fixed
between the two pillars of the right-hand side handrail.
A front and a rear range limiter prevent the wheelchair from rolling too
far to the front / back.
The frame of the wheelchair is fixed with adjustable clamps to the
cross-bar of the stabilizer. The wheelchair application is only allowed in
combination with the safety harness (chest belt and fall stop). Take
care that the brakes on the wheelchair are deactivated (e.g. dismantle
brake suspension). Re-activate brakes of the wheelchair after
operating the wheelchair on the treadmill and before using the
wheelchair over-ground or on the street.
file: n:\article\cos14310m5-v1_07hpc-en\20130207_cos14310m5-v1.07hpc-en_h-p-cosmos_treadmill_manual.doc
author: fh
email@h-p-cosmos.com
accessories and options
created 07.02.2013
printed 04.03.2013
page: 167 of 197

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Venus 200/75450/300200/75170/65190/65

Table of Contents