Interface Queue Drop Precedence Configuration - Dell PowerConnect 8024 User Configuration Manual

To access the Interface Queue Status page, click the Show All link at the top
of the page.

Interface Queue Drop Precedence Configuration

Use the Interface Queue Drop Precedence Configuration page to configure
thresholds and scaling values for each of four drop precedence levels on a
WRED-enabled interface queue. The settings you configure control the
minimum and maximum thresholds and a drop probability scaling factor for
the selected drop precedence level.
These parameters can be applied to each drop precedence level on a per-
interface-queue basis, or can be set globally for the same drop precedence
level and queue ID on all interfaces.
To display the Interface Queue Drop Precedence Configuration page, click
Quality of Service → Class of Service → Interface Queue Drop Precedence
Configuration in the navigation panel.
1142
Configuring Class-of-Service