Dhcpv6 Pool Configuration - Dell PowerConnect 8024 User Configuration Manual

DHCPv6 Pool Configuration

Use the Pool Configuration page to set up a pool of DHCPv6 parameters for
DHCPv6 clients. The pool is identified with a pool name and contains IPv6
addresses and domain names of DNS servers.
To display the page, click Routing → IPv6 → DHCPv6 → Pool Configuration
in the navigation panel. Figure 39-3 shows the page when no pools have been
created. After a pool has been created, additional fields display.
Figure 39-3. Pool Configuration
Configuring a DHCPv6 Pool
To configure the pool:
1 Open the Pool Configuration page.
2 Select Create from the Pool Name menu and type a name in the Pool
Name text box.
3 Click Apply.
Configuring DHCPv6 Server and Relay Settings
1087