Running Mail With A Combined Barcode Label Job - Pitney Bowes Connect+ Series Operator's Manual

12. Select the Tape button to print a tape. To print postage on the piece of mail, select the Start
button.
Note:
If you have accounting on your system, make sure you have selected an account for this job or you
will not be able to print postage.
13. Remove the piece of mail or package from the scale. Apply the tracking label, combined barcode
label and postage tape.
14. The system provides you with the option of automatically printing a receipt after every mail piece.
Select the appropriate option to continue.
15. The system will ask you if you want to track another package. Select No to complete the job.

Running mail with a combined barcode label job

Follow the steps below to run mail with a job that will allow you to scan the combined barcode label.
1. Place a piece of mail or package on the scale.
2. Open the combined barcode label job (e.g. ERR Job). If the job is already open, select Reload.
3. Scan the next tracking label to be used.
4. Scan the combined barcode label. The Destination ZIP Code and Customer Reference Number
will appear in the Job Properties list box on the left side of the screen.
Pitney Bowes Connect+ Series Operator Guide April, 2016
Running mail
Page 119 of 367