Enabling, Changing Or Disabling Lock Codes And Passwords - Pitney Bowes DM300c Operator's Manual

Basic Options (cont'd)

Enabling, Changing or Disabling Lock Codes and Passwords

Enabling the Lock Code
The Lock Code prevents unauthorized access to your mail ing system
after the machine has entered sleep mode.
1. Press Menu.
2. Select "Setup".
3. If necessary, press the green down arrow key to scroll through
the menu screens.
4. Select "Lock Code/Password".
5 Select "Enable Lock Code".
Change Lock Code
Enter New Lock Code
◄ Accept
5. Enter the new 4-digit Lock Code and select "Accept".
6. Re-enter the new Lock Code again to confirm and select "Ac-
cept".
7. At the "Lock Code Enabled" message, select "OK".
Disabling the Lock Code
You can disable the Lock Code if it has been enabled.
1. Press Menu.
2. Select "Setup".
3. If necessary, press the green down arrow key to scroll through
the menu screens.
4. Select "Lock Code/Password".
5. Select "Disable Lock Code".
6. When prompted, enter the current Lock Code and select "Ac-
cept".
SV62261 Rev. C
***_
7 • System Options
7-9