7
Command Line Interface
pppoe local ip
This command sets the local IP address for the PPPoE tunnel.
Syntax
pppoe local ip <ip-address>
ip-address - IP address of the local end of the PPPoE tunnel.
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
If the pppoe ip allocation mode is set to static, the local IP address must be
entered with this command, and the remote IP address must be entered with
the pppoe remote ip command.
Example
DUAL OUTDOOR#(if-ethernet)#pppoe local ip 10.7.1.200
DUAL OUTDOOR#
Related Commands
pppoe ip allocation mode (7-57)
pppoe remote ip (7-60)
pppoe remote ip
This command sets the remote IP address for the PPPoE tunnel.
Syntax
pppoe remote ip <ip-address>
ip-address - IP address of the remote end of the PPPoE tunnel.
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
If the pppoe ip allocation mode is set to static, the remote IP address must
be entered with this command, and the local IP address must be entered with
the pppoe local ip command.
7-60