Radius-Server Address; Radius-Server Port - Hirschmann BAT54 Installation Manual

7
Command Line Interface

radius-server address

This command specifies the primary and secondary RADIUS servers.
Syntax
radius-server address [secondary] <host_ip_address | host_name>
• secondary - Secondary server.
• host_ip_address - IP address of server.
• host_name - Host name of server. (Range: 1-20 characters)
Default Setting
None
Command Mode
Global Configuration
Example
DUAL OUTDOOR(config)#radius-server address 192.168.1.25
DUAL OUTDOOR(config)#

radius-server port

This command sets the RADIUS server network port.
Syntax
radius-server [secondary] port <port_number>
• secondary - Secondary server.
• port_number - RADIUS server UDP port used for authentication messages.
(Range: 1024-65535)
Default Setting
1812
Command Mode
Global Configuration
Example
DUAL OUTDOOR(config)#radius-server port 181
DUAL OUTDOOR(config)#
7-32