Features And Benefits; System Defaults - Hirschmann BAT54 Installation Manual

1
Introduction

Features and Benefits

• BAT54 Slave units support a 5 GHz point-to-point wireless link up 15.4 km (at
6 Mbps data rate) using integrated high-gain 17 dBi antennas
• BAT54M Master units support 5 GHz point-to-multipoint links using various
external antenna options
• Both BAT54 and BAT54M units also support access point services for the 5 GHz
and 2.4 GHz radios using various external antenna options
• Maximum data rate up to 108 Mbps on the 802.11a (5 GHz) radio
• Outdoor weatherproof design
• IEEE 802.11a and 802.11b/g compliant
• Local network connection via 10/100 Mbps Ethernet port
• Powered through its Ethernet cable connection to the power injector module
• Includes wall- and pole-mount brackets
• Security through 64/128/152-bit Wired Equivalent Protection (WEP) or 128-bit
Advanced Encryption Standard (AES) encryption
• Scans all available channels and selects the best channel and data rate based on
the signal-to-noise ratio
• Manageable through an easy-to-use web-browser interface, command line (via
Telnet), or SNMP network management tools

System Defaults

The following table lists some of the wireless bridge's basic system defaults. To
reset the bridge defaults, use the CLI command "reset configuration" from the Exec
level prompt.
Feature
Identification
Administration
General
TCP/IP
1-6
Parameter
System Name
User Name
Password
HTTP Server
HTTP Server Port
IP Address
Subnet Mask
Default Gateway
Primary DNS IP
Secondary DNS IP
Default
Dual Band Outdoor AP
admin
private
Enabled
80
192.168.1.1
255.255.255.0
0.0.0.0
0.0.0.0
0.0.0.0