Filter Ap-Manage; Filter Ethernet-Type Enable - Hirschmann BAT54 Installation Manual

7
Command Line Interface
Default
Disabled
Command Mode
Global Configuration
Command Usage
This command can disable wireless-to-wireless communications between
clients via the access point. However, it does not affect communications
between wireless clients and the wired network.
Example
DUAL OUTDOOR(config)#filter local-bridge
DUAL OUTDOOR(config)#
Related Commands

filter ethernet-type enable (7-54)

filter ap-manage

This command prevents access to wireless bridge management from the wireless
interface. Use the no form to disable this filtering.
Syntax
filter ap-manage
no filter ap-manage
Default
Disabled
Command Mode
Global Configuration
Example
DUAL OUTDOOR(config)#filter ap-manage
DUAL OUTDOOR(config)#
filter ethernet-type enable
This command checks the Ethernet type on all incoming and outgoing Ethernet
packets against the protocol filtering table. Use the no form to disable this feature.
Syntax
filter ethernet-type enable
no filter ethernet-type enable
Default
Disabled
7-54