Wpa-Psk-Type - Hirschmann BAT54 Installation Manual

Command Mode
Interface Configuration (Wireless)
Command Usage
• To support Wi-Fi Protected Access (WPA) for client authentication, use the
wpa-clients command to specify the authentication type, use the
wpa-mode command to specify pre-shared-key mode, and use this
command to configure one static key.
• If WPA is used with pre-shared-key mode, all wireless clients must be
configured with the same pre-shared key to communicate with the access
point.
Example
AP(if-wireless g)#wpa-preshared-key ASCII agoodsecret
AP(if-wireless g)#
Related Commands
wpa-clients (7-81)
wpa-mode (7-82)

wpa-psk-type

This command defines the Wi-Fi Protected Access (WPA) preshared-key type.
Syntax
wpa-psk-type <type>
type - Input format. (Options: Alphanumeric, HEX)
Default Setting
HEX
Command Mode
Interface Configuration (Wireless)
Example
AP(if-wireless a)#wpa-preshared-key ASCII agoodsecret
AP(if-wireless a)#
Related Commands
wpa-preshared-key (7-82)
Wireless Interface Commands
7
7-83