Table of Contents
Advertisement
Top View (BAT54M)
N-Type External
Antenna Connector
(2.4 GHz)
Integrated High-Gain Antenna
The BAT54 wireless bridge includes an integrated high-gain (17 dBi) flat-panel
antenna for 5 GHz operation. The antenna can provide a direct line-of-sight link up
to 15.4 km (9.6 miles) with a 6 Mbps data rate.
External Antenna Options
The BAT54M Master bridge unit does not include an integrated antenna, but
provides various external antenna options for both 5 GHz and 2.4 GHz operation. In
a point-to-multipoint configuration, an external high-gain omnidirectional, sector, or
high-gain panel antenna can be attached to communicate with bridges spread over
a wide area. The BAT54 and BAT54M units both require the 2.4 GHz 8 dBi
omnidirectional external antenna for 2.4 GHz operation. The following table
summarizes the external antenna options:
Antenna Type
5 GHz Omnidirectional
5 GHz 120-Degree Sector
5 GHz 60-Degree Sector
5 GHz High-Gain Panel
2.4 GHz Omnidirectional
* Half-power beam width in degrees
External antennas connect to the N-type RF connectors on the wireless bridge using
the provided coaxial cables.
Gain (dBi) HPBW*
Horizontal
8
360
14
120
17
60
23
9
8
360
Hardware Description
N-Type External
Antenna Connector
(5 GHz)
HPBW*
Polarization
Vertical
12
Linear, vertical
6
Linear, vertical
6
Linear, vertical
9
Linear
15
Linear, vertical
1
Max Range/Speed
3.3 km at 6 Mbps
10.3 km at 6 Mbps
14 km at 6 Mbps
24.4 km at 6 Mbps
7.6 km at 6 Mbps
1-3
Advertisement
Table of Contents
