Default
Disabled
Command Mode
Global Configuration
Command Usage
• Ethernet and WDS user names and passwords must be set before enabling
the 802.1x supplicant feature for the specified port.
• The access point currently only supports EAP-MD5 CHAP for 802.1x
supplicant authentication.
Example
DUAL OUTDOOR(config)#802.1x supplicant wds_user 1 David
DUAL OUTDOOR(config)#802.1x supplicant wds_password 1 ABC
DUAL OUTDOOR(config)#802.1x supplicant wds 1
DUAL OUTDOOR(config)#
address filter default
This command sets filtering to allow or deny listed MAC addresses.
Syntax
address filter default <allowed | denied>
• allowed - Only MAC addresses entered as "denied" in the address filtering
table are denied.
• denied - Only MAC addresses entered as "allowed" in the address filtering
table are allowed.
Default
allowed
Command Mode
Global Configuration
Example
DUAL OUTDOOR(config)#address filter default denied
DUAL OUTDOOR(config)#
Related Commands
address filter entry (7-40)
show authentication (7-42)
7
Authentication
7-39