Snmp-Server Location; Show Snmp - Hirschmann BAT54 Installation Manual

snmp-server location

This command sets the system location string. Use the no form to remove the
location string.
Syntax
snmp-server location text
no snmp-server location
text - String that describes the system location.
(Maximum length: 20 characters)
Default Setting
None
Command Mode
Global Configuration
Example
DUAL OUTDOOR(config)#snmp-server location building-1
DUAL OUTDOOR(config)#
Related Commands
snmp-server contact (7-25)

show snmp

This command displays the SNMP configuration settings.
Command Mode
Exec
Example
DUAL OUTDOOR#show snmp
SNMP Information
============================================
Service State : Enable
Community (ro) : *****
Community (rw) : *****
Location : WC-19
Contact : Paul
Traps : Enabled
Host Name/IP : 10.1.19.23
Trap Community : *****
=============================================
DUAL OUTDOOR#
7
SNMP Commands
7-27