Table of Contents
Advertisement
7
Command Line Interface
radius-server timeout
This command sets the interval between transmitting authentication requests to the
RADIUS server.
Syntax
radius-server [secondary] timeout number_of_seconds
• secondary - Secondary server.
• number_of_seconds - Number of seconds the access point waits for a reply
before resending a request. (Range: 1-60)
Default Setting
5
Command Mode
Global Configuration
Example
DUAL OUTDOOR(config)#radius-server timeout 10
DUAL OUTDOOR(config)#
show radius
This command displays the current settings for the RADIUS server.
Default Setting
None
Command Mode
Exec
Example
DUAL OUTDOOR#show radius
Radius Server Information
========================================
IP
Port
Key
Retransmit
Timeout
========================================
Radius Secondary Server Information
========================================
IP
Port
Key
Retransmit
Timeout
========================================
AP#
7-34
: 192.168.1.25
: 181
: *****
: 5
: 10
: 0.0.0.0
: 1812
: *****
: 3
: 5
Advertisement
Table of Contents
