Delete; Dir - Hirschmann BAT54 Installation Manual

7
Command Line Interface
The following example shows how to download a configuration file:
DUAL OUTDOOR#copy tftp file
1. Application image
2. Config file
3. Boot block image
Select the type of download<1,2,3>:
TFTP Source file name:syscfg
TFTP Server IP:192.168.1.19
DUAL OUTDOOR#

delete

This command deletes a file or image.
Syntax
delete filename
filename - Name of the configuration file or image name.
Default Setting
None
Command Mode
Exec
Caution: Beware of deleting application images from flash memory. At least one
application image is required in order to boot the wireless bridge. If there are
multiple image files in flash memory, and the one used to boot the wireless
bridge is deleted, be sure you first use the bootfile command to update the
application image file booted at startup before you reboot the wireless bridge.
Example
This example shows how to delete the test.cfg configuration file from flash memory.
DUAL OUTDOOR#delete test.cfg
Are you sure you wish to delete this file? <y/n>:
DUAL OUTDOOR#
Related Commands
bootfile (7-28)

dir (7-30)

dir
This command displays a list of files in flash memory.
Command Mode
Exec
7-30
[1]:2